Description

International Interdeck

A tough, slip resistant deck paint that protects the surface from every day wear and tear. It’s easy to apply, comes in a range of colours and its low sheen finish helps prevent sunlight from reflecting off decks

Product features and benefits

Interdeck provides an excellent slip resistant finish. It contains a fine aggregate and will apply easily on all substrates.

• Low sheen finish prevents dazzling reflected sunlight off decks
• Semi-Gloss
• Easy application
• Available in a range of colours

The tough polyurethane resin protects decks against everyday wear and tear

Product Data

APPLICATION AND USE

Preparation

PREVIOUSLY PAINTED SURFACES 

In Good Condition Wash down with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 280320
grade (grit) paper.
In Poor Condition Remove all previous coatings and prime the substrate.
PRIMING All preparation for bare substrates is covered on the appropriate primer datasheet.

BARE WOOD

Sand smooth with 80180 grade paper and then 280 grade paper. Remove sanding dust by brushing,
dusting and wiping. If wiping with solvent then allow to dry completely before applying products recommended for
application direct to wood (see specific coating systems).

STEEL

Degrease with solvent, Super Cleaner or a suitable liquid detergent. Grit-blast to Sa 2½ near white metal
surface. If grit-blasting is not possible, grind the metal surface with 2436 grit abrasive discs to a uniform, clean, bright
metal surface with a 5075 microns anchor pattern. Use angle grinder on small areas. Clean thoroughly and allow to dry.
Pre-prime using an International primer as detailed for specific coating systems.

ALUMINIUM

Degrease with solvent, Super Cleaner or a suitable liquid detergent. Sand well using 24120 grade
(aluminium compatible) paper. Coarser grades are recommended to achieve optimum adhesion. Clean thoroughly and
allow to dry. Pre-prime using an International primer as soon as possible (within 8 hours) as detailed for specific coating
systems.

GRP

Degrease with solvent, Super Cleaner or a suitable liquid detergent. Sand well using 60120 grade paper. Clean
thoroughly and allow to dry. Pre-prime using an International primer as detailed for specific coating systems.

AGED/WEATHERED GELCOATS

Due to the potentially porous nature of aged/weathered gelcoats the risk of
solvent/moisture entrapment after painting is much higher than when gelcoat is new. As a result this entrapment could
lead to blistering of the paint film. To reduce the risk of paint film blistering it is recommended that 3 coats of Interprotect
are applied to seal the gelcoat. Interprotect must be overcoated with the appropriate undercoat/primer depending on the
application method prior to topcoat application. Please speak to your local sales representative for more information.

ALL SUBSTRATES

If any filling is required use the appropriate product from the International range .
Method Sand the primer with 180220 grade wet or dry paper. Remove dust with a dust wipe. Apply 12 coats